1999 infiniti i30 starter




1999 infiniti i30 starter

Article Navigation:
  • Photo
  • Starters for Infiniti I30 | eBay
  • Video
  • RELATED PAGES
  • Low prices on Starter for your Infiniti I30 at Advance Auto Parts. Find aftermarket and OEM parts online or at a local store near you.

    They are available for the following Infiniti I30 years: , , , , , , 01, 00, 99, 98, 97, This part is also sometimes called Infiniti I

    Results 1 - 48 of Starter OE#M0T for Nissan Maxima Infiniti I35 L L V6. $ 3 left · Starter Lester For Infiniti I

    1999 infiniti i30 starter

    1999 infiniti i30 starter

    I Starter Replacement Loosen the clamp on the exhaust hose going to the engine, but on the airbox side of it. Disconnect starter harness connecting the start solenoid to the power supply wire using a 12MM socket or open ended wrench. Attach the 17mm socket to it, and an extension to the other end.

    1999 infiniti i30 starter

    1999 infiniti i30 starter

    1999 infiniti i30 starter

    1999 infiniti i30 starter

    1999 infiniti i30 starter

    Need A Repair Shop? I'm a newbie to this forum, but glad to be a part. Can anyone help me with replacing a starter on a I30? Disconnect negative battery terminal. Remove everything up to the throttle body. Detach harness protector that is above the starter and to the left of the battery. Disconnect starter harness connecting the start solenoid to the power supply wire using a 12MM socket or open ended wrench. Requires some force to be removed. This requires a lot of force to remove. Pull starter away from engine at a slight downward and away angle.

    This requires some maneuvering to remove from the engine as there is little room to work with. Removal of the battery may help in this situation. Put start back in place using the reverse order of removal instructions. Be sure to finger tighten all bolts before tightening them down all the way!!

    1999 infiniti i30 starter

    Use the deep sockets to get the bolts started. The 14MM and 17MM bolts tighten with a large amount of force. Reconnect negative battery terminal.

    Find local automotive repair shops in your area. It was close enough for us. Infinity expert has nailed it.. You should not loose the key registration when replacing the starter.

    1999 infiniti i30 starter

    I Starter Replacement Is it possible to wire the starter backwards and thereby run the engine backwards? If so, what dameage would be expected? No - the case of the starter is ground, and can't be changed. You would have to change the whole electrical system to positive ground, and that would do much more damage than cranking the engine backwards! And why exactly would you want to have the engine run backwards? Replacing starter i30 for non-mechanics like me.

    Answer I just did it - a little tougher for a non-mechanic like myself than the answers I found posted would indicate. First - take off airbox. There are three screws connecting it to the body of the car. Take off the two screws connecting it to the bracket, too. You should remove the bracket from the car, though.

    Unplug that electrical connector by pushing down on the green tab and pulling it off. You'll have to unplug the three hoses toward the front of the engine from the assembly, and two of those hoses have those damn metal clamps on them use a pliers. Loosen the clamp on the exhaust hose going to the engine, but on the airbox side of it.

    1999 infiniti i30 starter

    Move the airbox out of the way - you can sort of wedge it under the edge of the hood. Now - remove the nut holding the wire that's nearest to the firewall the other nut has a connection to the other part of the starter, and doesn't need to be removed. Pull that whole wire assembly out of the way. It's connected to a bracket, and to remove it you need to stick a tiny flat blade screwdriver into the top. Shine a flashlight in there - you'll see a little black tab flush against the metal piece.

    Pull that tab away from the metal with the screwdriver and the whole assembly pulls up. See those wires blocking your way from getting at that top nut? Another one of those black tab things! This one is tough to loosen up, I ended up breaking the round plastic piece.

    DIY How to install replace the starter Nissan Maxima Infiniti I30 √



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲